| IPS |
LastRevision |
Bilingual/Persian |
Title |
| IPS-C-TP-101 |
2010 |
B |
Construction Standard for Surface Preparation |
| IPS-C-TP-102 |
2010 |
B |
Construction Standard for Painting |
| IPS-C-TP-274 |
2009 |
B |
Construction Standard for Protective Coating |
| IPS-C-TP-352 |
2010 |
B |
Construction Standard for Lining |
| IPS-C-TP-701 |
2010 |
B |
Construction Standard for Application of Thermal Insulations |
| IPS-C-TP-742 |
2010 |
B |
Construction Standard for Corrosion Consideration During Fabrication & Installation |
| IPS-C-TP-820 |
2013 |
|
Construction Standard for Cathodic Protection |
| IPS-E-TP-100 |
2009 |
B |
Engineering Standards for Paints |
| IPS-E-TP-270 |
2009 |
B |
Engineering Standards for Protective Coatings for Buried and Submerged Steel Structures |
| IPS-E-TP-350 |
2010 |
B |
Engineering Standard for Linings |
| IPS-E-TP-740 |
2010 |
B |
Engineering Standard for Corrosion Consideration in Material Selection |
| IPS-E-TP-760 |
2005 |
|
Engineering Standard for Corrosion Consideration in Design |
| IPS-E-TP-780 |
2010 |
B |
Engineering Standards for Chemical Control of Corrosive Environments |
| IPS-E-TP-820 |
2010 |
B |
Engineering Standard for Cathodic Protection |
| IPS-G-TP-335 |
2013 |
|
Material and Construction Standard for Three Layer Polyethylene Coating System |
| IPS-I-TP-802 |
2011 |
|
Inspection Standard for Internal Corrosion Survey Methods & Inhibitor Evaluation (for Pipeline & for Plant) |
| IPS-I-TP-820 |
2013 |
|
Inspection Standard for Monitoring Cathodic Protection Systems |
| IPS-M-TP-105 |
2006 |
|
Material and Equipment Standard for Asphalt Mastic (Cold Applied) |
| IPS-M-TP-110 |
2014 |
|
Material and Equipment Standard for Vinyl Paint (Aluminum) as Intermediate and Top Coat (Finish) |
| IPS-M-TP-115 |
2012 |
|
Material and Equipment Standard for Zinc Oxide, Iron Oxide, Raw Linseed Oil and Alkyd Primer |
| IPS-M-TP-120 |
2013 |
|
Material and Equipment Standard for Zinc Oxide, Iron Oxide and Alkyd Intermediate Paint |
| IPS-M-TP-125 |
2012 |
|
Material and Equipment Standard for White Alkyd Paint for Top Coat (Finish) |
| IPS-M-TP-130 |
2014 |
|
Material and Equipment Standard for Colored Alkyd Paint for Top Coat (Finish) Except White |
| IPS-M-TP-135 |
2014 |
|
Material and Equipment Standard for Chlorinated Rubber Paint for Top Coat (Finish) |
| IPS-M-TP-140 |
2014 |
|
Material and Equipment Standard for Chlorinated Rubber Paint for Intermediate Coat |
| IPS-M-TP-145 |
2014 |
|
Material and Equipment Standard for Chlorinated Rubber Inhibitive Primer |
| IPS-M-TP-150 |
2012 |
|
Material and Equipment Standard for Alkyd Paint (Aluminum) Leafing as Top Coat (Finish) |
| IPS-M-TP-155 |
2012 |
|
Material and Equipment Standard for Alkyd Paint (Aluminum) Non - Leafing as Intermediate |
| IPS-M-TP-160 |
2012 |
|
Material and Equipment Standard for Alkyd Paint (High Build Thixotropic Leafing Aluminum) as Top Coat (Finish) |
| IPS-M-TP-168 |
2001 |
|
Material Standard for Acrylic Silicone Finish Paint for Temperature Applications Up to 230°C |
| IPS-M-TP-175 |
2014 |
|
Material and Equipment Standard for Silicone Alkyd Paint (White or Colored) as Top Coat (Finish) |
| IPS-M-TP-180 |
2012 |
|
Material and Equipment Standard for Wash Primer (Basic Zinc Chromate-Vinyl Butyral) |
| IPS-M-TP-190 |
2013 |
|
Material and Equipment Standard for Coal Tar Epoxy Polyamide Paint as Primer, Intermediate and Top Coat (Finish) |
| IPS-M-TP-200 |
2014 |
|
Material and Equipment Standard for Vinyl Paint, (White or Colored) as Primer, Intermediate and Top Coat (Finish) |
| IPS-M-TP-202 |
2015 |
|
Material and Equipment Standard for Tow Pack Amine-Adduct Cured Epoxy Paint as Primer, Intermediate and Top Coat |
| IPS-M-TP-205 |
2012 |
|
Material and Equipment Standard for Zinc Rich Epoxy Paint (Organic Zinc-Rich) as Primer, Intermediate and Top Coat (Finish) |
| IPS-M-TP-210 |
2014 |
|
Material and Equipment Standard for (Zinc Silicate) Inorganic Zinc-Rich Paint as Primer |
| IPS-M-TP-215 |
2014 |
|
Material and Equipment Standard for Epoxy Polyamide Primer |
| IPS-M-TP-220 |
2012 |
|
Material and Equipment Standard for Epoxy Polyamide Paint as Intermediate Paint |
| IPS-M-TP-225 |
2012 |
|
Material and Equipment Standard for Epoxy Polyamide Paint as Top Coat (Finish) |
| IPS-M-TP-230 |
2014 |
|
Material and Equipment Standard for Coal Tar Mastic (Cold Applied) |
| IPS-M-TP-235 |
2012 |
|
Material and Equipment Standard for Two Pack Aliphatic Polyurethane Paint as Top Coat (Finish) |
| IPS-M-TP-240 |
2013 |
|
Material and Equipment Standard for Two Pack Aliphatic Polyurethane Paint as Top Coat (Camouflage Colors) |
| IPS-M-TP-250 |
2015 |
|
Material and Equipment Standard for Amine-Cured Epoxy Resin as Primer, Intermediate, and Top Coat for Atmospheric Environment |
| IPS-M-TP-275 |
2015 |
|
Material and Equipment Standard for Fast Drying Synthetic Primer for Use with Hot Applied Coal Tar or Bitumen (Asphalt) Enamels |
| IPS-M-TP-280 |
2015 |
|
Material and Equipment Standard for Coal Tar Primer (Cold Applied) for Use with Hot Applied Coal Tar Enamel (IPS-M-TP-290) |
| IPS-M-TP-285 |
2013 |
|
Material and Equipment Standard for Bitumen Primer (Cold Applied) for Use with Hot Applied Bitumen Enamel (IPS-M-TP-295) |
| IPS-M-TP-290 |
2015 |
|
Material and Equipment Standard for Coal Tar Enamel (Hot Applied) |
| IPS-M-TP-295 |
2015 |
|
Material Standard for Bitumen Enamel (Hot Applied) |
| IPS-M-TP-300 |
2013 |
|
Material and Equipment Standard for Glass Fiber Mat (Inner Wrap) |
| IPS-M-TP-305 |
2015 |
|
Material and Equipment Standard for Coal Tar Impregnated Glass Fiber Mat for Outer Wrap |
| IPS-M-TP-306 |
2015 |
|
Material and Equipment Standard for Bitumen Impregnate Glass Fiber Mat for Outer wrap |
| IPS-M-TP-310 |
2011 |
|
Material Standard for Cold Applied Laminated Plastic Tape as Inner Layer Tape for Tape Coating System of Buried Steel Pipes |
| IPS-M-TP-311 |
2011 |
|
Material Standard for Cold Applied Laminated Plastic Tape as Outer Layer Tape for Tape Coating System of Buried Steel Pipes |
| IPS-M-TP-313 |
2012 |
|
Material Standard for Hand-Applied Laminated Tape Suitable for Cold-Applied Tape Coating System |
| IPS-M-TP-314 |
2012 |
|
Material Standard for Hand Applied Laminated Tape (Suitable for Hot Applied Coating Systems) |
| IPS-M-TP-315 |
2013 |
|
Material Standard for Perforated Plastic Tape (as Rockshield) for Pipe Coating |
| IPS-M-TP-316 |
2000 |
|
Material Standard for Plastic Grid (as Rockshield) for Pipe Coating |
| IPS-M-TP-317 |
2003 |
|
Material Standard for Hand-Applied Petrolatum Tape and Primer |
| IPS-M-TP-318 |
2013 |
|
Material Standard for Heat-Shrinkable Cross-Linked Polyethylene Coatings (Two Layers) |
| IPS-M-TP-321 |
2011 |
|
Material Standard for Primers (Ditch and Yard) for Use with Cold-Applied Laminated Plastic Tape (IPS-M-TP-310) for Tape Coating System of Buried Steel Pipes |
| IPS-M-TP-322 |
2012 |
|
Material Standard for Primer to be Used with Hand-Applied Laminated Tape Suitable for Cold-Applied Tape Coating System |
| IPS-M-TP-323 |
2013 |
|
Material Standard for Primer to be Used with Hand-Applied Laminated Tape Suitable for Hot-Applied Tape Coating Systems |
| IPS-M-TP-672 |
2000 |
|
Material and Equipment Standard for Inhibitor, Anti-Icing for Use in Jet Turbine Fuels |
| IPS-M-TP-675 |
2004 |
|
Material and Equipment Standard for Inhibiting Package for Cooling Water Systems |
| IPS-M-TP-710 |
2013 |
|
Material and Equipment Standard for Thermal Insulation |
| IPS-M-TP-750 |
2016 |
|
Material and Equipment Standard for Cathodic Protection |
| IPS-M-TP-770 |
2018 |
P |
Plant -Applied external fusion bond epoxy Pipe coating for steel |
| IPS-M-TP-780 |
2019 |
P |
Steel tubes and fittings for onshore and offshore pipelines external liquid applied epoxy and epoxy |
| IPS-M-TP-800 |
2019 |
P |
Petroleum, petrochemical and natural gas industries production systems |