| IPS |
Title |
| IPS-C-AR-110 |
Construction Standard for Installation, Testing, Adjusting and Commissioning of HVAC&R Systems |
| IPS-E-AR-100 |
Engineering Standard for Building Heating System |
| IPS-E-AR-120 |
Engineering Standard for Building Air Conditioning Systems |
| IPS-E-AR-130 |
Engineering Standard for Humidification & Dehumidification System |
| IPS-E-AR-160 |
Engineering Standard for Venting, Ventilation and Pressurizing System |
| IPS-E-AR-180 |
Engineering Standard for Cold Stores and Ice Plants |
| IPS-E-AR-342 |
Engineering Standard for Sanitary Pipework |
| IPS-E-AR-360 |
Engineering Standard for Building Piping (Hot and Cold) |
| IPS-M-AR-105 |
Material and Equipment Standard for Boilers & Burners |
| IPS-M-AR-125 |
Material and Equipment Standard for Packaged Air Conditioners |
| IPS-M-AR-130 |
Material and Equipment Standard for Humidification & Dehumidification Unit & System |
| IPS-M-AR-145 |
Material and Equipment Standard for Field Erected Air Conditioning Systems |
| IPS-M-AR-185 |
Material and Equipment Standard for Field Erected Refrigeration System and Ice Plant |
| IPS-M-AR-205 |
Material and Equipment Standard for Fans, Filters & Air Distribution Units & Systems |
| IPS-M-AR-215 |
Material Standard for Pipes, Valves and Fittings |
| IPS-M-AR-225 |
Material and Equipment Standard for General HVAC&R Equipment |
| IPS-M-AR-235 |
Material Standard for Insulation of HVAC&R Field |
| IPS-M-AR-245 |
Material and Equipment Standard for Room Air Conditioners (Window and Thru-the-Wall Type) |
| IPS-M-AR-255 |
Material Standard for Thermoplastics Pipings for Hot and Cold Water in Buildings |
| IPS-M-AR-345 |
Material Standard for Water Supply & Sewerage Equipment |
| IPS-C-CE-112 |
Construction Standard for Earthworks |
| IPS-C-CE-132 |
Construction Standard for Foundations, Piles and Retaining Walls |
| IPS-C-CE-200 |
Construction Standard for Concrete Structures |
| IPS-C-CE-210 |
Construction Standard for Steel Structures |
| IPS-C-CE-260 |
Construction Standard for Fireproofing |
| IPS-C-CE-342 |
Construction Standard for Water Supply and Sewerage Systems |
| IPS-C-CE-355 |
Standard for Demolition |
| IPS-E-CE-110 |
Engineering Standard for Soil Engineering |
| IPS-E-CE-120 |
Engineering Standard for Foundations |
| IPS-E-CE-130 |
Engineering Standard for Piles |
| IPS-E-CE-140 |
Engineering Standard for Retaining Walls & Slope Protection |
| IPS-E-CE-160 |
Engineering Standard for Geometric Design of Roads an Streets |
| IPS-E-CE-200 |
Engineering Standard for Concrete Structures |
| IPS-E-CE-210 |
Engineering Standard for Steel Structures |
| IPS-E-CE-260 |
Engineering Standard for Fireproofing in Building |
| IPS-E-CE-340 |
Engineering Standard for Water Resources and Distribution Systems |
| IPS-E-CE-380 |
Engineering Standard for Drain and Sewer Systems Outside Buildings |
| IPS-E-CE-390 |
Engineering Standard for Rain & Foul Water Drainage of Buildings |
| IPS-E-CE-400 |
Engineering Standard for Sanitary Sewage Treatment |
| IPS-E-CE-500 |
Engineering Standard for Loads |
| IPS-G-CE-170 |
Engineering and Construction Standard for Culvert Bridges and Related Structures |
| IPS-G-CE-182 |
Engineering and Construction Standard for Road Surfacing & Pavements |
| IPS-G-CE-250 |
Engineering, Construction and Material Standard for Chimneys and Stacks |
| IPS-G-CE-270 |
Engineering, Construction and Material Standard for Fencing & Gates |
| IPS-G-CE-470 |
Engineering and Construction Standard for Onshore Facilities |
| IPS-G-CE-480 |
Engineering and Construction Standard for Offshore Installations |
| IPS-M-CE-105 |
Material Standard for Building Materials |
| IPS-G-CP-100 |
Petroleum industry- Downhole sucker rod pumps - Code of practice |
| IPS-G-CP-200 |
Petroleum industry - Petroleum and gas industrial wellhead and christmas tree equipment - Code of practice |
| IPS-G-CP-300 |
Petroleum industry –Electric submersible pump for artificial lift in oil wells - Code of practice |
| IPS-G-CP-400 |
Determinig standard capacities, technical requirements, health, safety & environment of the skid mounted (Crude oil prefabricated rocessing units) |
| IPS-G-DR-100 |
Petroleum industry - Downhole completion equipment - Code of practice |
| IPS-G-DR-200 |
Petroleum industry-Rotary drilling bits -Code of practice |
| IPS-G-DR-300 |
Petroleum industry- Casing and tubing for wells-Code of practice |
| IPS-G-DR-400 |
Petroleum industry-Drill pipes-Code of practice |
| IPS-G-DR-500 |
Petroleum industry-Coiled tubing-Code of practice |
| IPS-C-EL-115 |
Construction Standard for Electrical Installation |
| IPS-E-EL-100 |
Engineering Standard for Electrical System Design (Industrial & Non-Industrial) |
| IPS-E-EL-110 |
Engineering Standard for Hazardous Area |
| IPS-E-EL-160 |
Engineering Standard for Overhead Transmission & Distribution Lines |
| IPS-G-EL-130 |
Petroleum industry - Explosion proof rotary electrical machines - Part 1: Asynchronous electrical motors - Code of practice |
| IPS-I-EL-215 |
Inspection Standard for Potentially Explosive Atmospheres (Hazardous Area) |
| IPS-I-EL-217 |
Inspection Standard for Precommissioning Electrical Tests |
| IPS-M-EL-131 |
Material and Equipment Standard for Low Voltage Induction Motors |
| IPS-M-EL-132 |
Material and Equipment Standard for Medium and High Voltage Induction Motors |
| IPS-M-EL-136 |
Material and Equipment Standard for Rotating Electrical Machines Direct Current Motors |
| IPS-M-EL-138 |
Material and Equipment Standard for Synchronous Generators |
| IPS-M-EL-143 |
Material and Equipment Standard for Low Voltage Switchgear and Controlgear |
| IPS-M-EL-144 |
Material and Equipment Standard for Medium and High Voltage AC Switchgear and Controlgear |
| IPS-M-EL-151 |
Material and Equipment Standard for Dry Type Power Transformers |
| IPS-M-EL-152 |
Material and Equipment Standard for Oil Immersed Power Transformers |
| IPS-M-EL-155 |
Material and Equipment Standard for Transformer Rectifiers for Cathodic Protection |
| IPS-M-EL-161 |
Material and Equipment Standard for General Electrical Items |
| IPS-M-EL-174 |
Material and Equipment Standard for Battery and Battery Charger (DC Power supply) |
| IPS-M-EL-176 |
Material and Equipment Standard for Uninterruptible Power Supply System (UPS) |
| IPS-M-EL-181 |
Material and Equipment Standard for Power Factor Improvement Capacitor |
| IPS-M-EL-190 |
Material Standard for Electrical Heat Tracing |
| IPS-M-EL-220 |
Material and Equipment Standard for Current Limiting Reactors |
| IPS-M-EL-230 |
Material and Equipment Standard for Electrical Lighting Columns |
| IPS-M-EL-240 |
Material and Equipment Standard for Low Voltage Industrial and Flameproof a.c. Switch-Fuse Assembly |
| IPS-M-EL-271 |
Material and Equipment Standard for Low Voltage Cables and Wires |
| IPS-M-EL-272 |
Material and Equipment Standard for Medium and High Voltage Power Cables |
| IPS-M-EL-273 |
Material Standard for SubMarine Power Cables with Inherent Optical Fibers |
| IPS-E-GN-000 |
General Index to Standards and Standard Drawings |
| IPS-E-GN-100 |
Engineering Standard for Units |
| IPS-E-GN-110 |
Principles and rules for the structure and drafting of Iranian Petroleum Standards |
| IPS-E-GN-120 |
Engineering Standard for Drafting |
| IPS-G-GN-180 |
General Standard for Gas Cylinders |
| IPS-G-GN-200 |
General Standard for CNG |
| IPS-G-GN-210 |
General Standard for Packing and Packages |
| IPS-G-GN-220 |
General Standard for Corrosion Resistant Alloy Seamless Tubes for Use as Casing, Tubing and Coupling Stock (CRA) |
| IPS-G-GN-230 |
General Standard for Basic Design Package and Recommended Practice for Front End Engineering Design |
| IPS-G-GN-370 |
General Standard for Electric and Hydraulic Elevators |
| IPS-G-GN-700 |
Petroleum industry-Non-Ferrous metals and alloys |
| IPS-G-GN-750 |
Petroleum industry- Alloy Steels |
| IPS-I-GN-335 |
Periodical inspection & Testing of Elevators |
| IPS-I-GN-350 |
Periodical inspection & Testing of Cranes |
| IPS-M-GN-110 |
Material and Equipment Standard for Fork Lift Truck |
| IPS-M-GN-130 |
Material and Equipment Standard for Metric Type Fasteners (Screws , Bolts, Studs , Nuts, and Washers) |
| IPS-M-GN-140 |
Material and Equipment Standard for Bearings |
| IPS-M-GN-150 |
Material Standard for Steel Wire Ropes for General Services |
| IPS-M-GN-160 |
Material and Equipment Standard for Hooks, Shackles, Eyes Bolts and chains |
| IPS-M-GN-170 |
Material Standard for Laboratory Glassware & Related Apparatus |
| IPS-M-GN-210 |
Material and Equipment Standard for Conveyors |
| IPS-M-GN-240 |
Material Standard for Workshop and Wall Supported Jib Cranes and Chain Hoists |
| IPS-M-GN-260 |
Material and Equipment Standard for Pallets |
| IPS-M-GN-330 |
Material and Equipment Standard for Offshore Cranes |
| IPS-M-GN-340 |
Material and Equipment Standard for Mobile Cranes-Power Driven |
| IPS-M-GN-350 |
Material and Equipment Standard for Overhead and Gantry Cranes (Overhead Traveling and Portal Bridge Cranes) |
| IPS-M-GN-360 |
Material and Equipment Standard for General Use Hoses |
| IPS-M-GN-365 |
Material and Equipment Standard for Mobile Air Compressors |
| IPS-M-GN-375 |
Material and Equipment Standard for Arc Welding Equipment and Accessories |
| IPS-M-GN-450 |
Material and Equipment Standard for Abrasive Air Blasting Machine |
| IPS-M-GN-470 |
Material and Equipment Standard for Water Blasting Equipment |
| IPS-G-HT-100 |
Petroleum and gas industries - Design, manufacturing and operation of magnetic intelligent pigs - Technical requirements |
| IPS-C-IN-100 |
Construction and Installation Standard for General Instruments Field Inspection, Calibration & Testing of Instrument and Instrument System |
| IPS-C-IN-110 |
Construction Standard for Pressure Instruments |
| IPS-C-IN-120 |
Construction and Installation Standard for Temperature Instruments |
| IPS-C-IN-130 |
Construction and Installation Standard for Flow Instruments |
| IPS-C-IN-140 |
Construction and Installation Standard for Level Instruments |
| IPS-C-IN-160 |
Construction and Installation Standard for Control Valves |
| IPS-C-IN-190 |
Installation and Construction Standard for Transmission Systems |
| IPS-C-IN-240 |
Construction Standard for Measurement of Liquid Hydrocarbons Custody Transfer |
| IPS-E-IN-100 |
Engineering Standard for General Instrumentation |
| IPS-E-IN-105 |
Engineering Standard for Instrument workshop, layouts, test and calibration tools |
| IPS-E-IN-110 |
Engineering Standard for Pressure Instruments |
| IPS-E-IN-120 |
Engineering Standard for Temperature Instruments |
| IPS-E-IN-130 |
Engineering Standard for Flow Instruments |
| IPS-E-IN-140 |
Engineering Standard for Level Instruments |
| IPS-E-IN-160 |
Engineering Standard for Control Valves |
| IPS-E-IN-180 |
Engineering Standard for Instruments Electrical Power Supply & Distribution Systems |
| IPS-E-IN-190 |
Engineering Standard for Transmission Systems |
| IPS-E-IN-240 |
Engineering Standard for Measurement of Liquid Hydrocarbons (Custody Transfer) |
| IPS-G-IN-150 |
Petroleum industry - Downhole and surface measurement tools - Code of practice |
| IPS-G-IN-160 |
Petroleum industry - Safety valves, control valves and peripherals - Code of practice |
| IPS-G-IN-200 |
General Standard for Instruments air system |
| IPS-G-IN-210 |
General Standard for Instrument Protection |
| IPS-G-IN-220 |
Engineering and Installation Standard for Control Centers |
| IPS-G-IN-230 |
General Standard for On-Line Analyzer |
| IPS-G-IN-240 |
Petroleum industry - Custody fluid flow metering systems (liquid, gas and wet gas) - Code of practice |
| IPS-G-IN-250 |
Engineering and Construction Standard for Process Control System (PCS) |
| IPS-G-IN-260 |
Engineering and Installation Standard for Indicating Lights, Alarms & Protective Systems |
| IPS-G-IN-270 |
General Standard for Instruments of Fire and Gas Detection Equipment |
| IPS-G-IN-290 |
Engineering and Construction Standard for Programmable Logic Controllers (PLC) |
| IPS-G-IN-300 |
Tank Gauging for Petroleum and Petroleum Products |
| IPS-I-IN-100 |
Inspection Standard for General Instrument Systems |
| IPS-I-IN-115 |
Periodical Inspection for Instrumentation |
| IPS-M-IN-110 |
Material and Equipment Standard for Pressure Instruments |
| IPS-M-IN-120 |
Material and Equipment Standard for Temperature Instruments |
| IPS-M-IN-130 |
Material and Equipment Standard for Flow Instruments |
| IPS-M-IN-140 |
Material and Quality Control Standard for Level Instruments |
| IPS-M-IN-150 |
Material and Equipment Standard for Receiving Instruments |
| IPS-M-IN-160 |
Material Standard for Control Valves |
| IPS-M-IN-190 |
Material and Equipment Standard for Transmission Systems |
| IPS-M-IN-220 |
Material and Equipment Standard for Control Panels and System Cabinets |
| IPS-M-IN-240 |
Material Standard for Measurement of Liquid Hydrocarbons (Custody Transfer) |
| IPS-M-IN-250 |
Material and Equipment Standard for Process Control System (PCS) |
| IPS-M-IN-260 |
Material and Equipment Standard for Alarms and Protective Systems |
| IPS-M-IN-280 |
Material Standard for Miscellaneous Items |
| IPS-M-IN-290 |
Material and Equipment Standard for Programmable Logic Controllers (PLC) |
| IPS-C-ME-130 |
Construction Standard for LPG Pressure Storage Spheres |
| IPS-E-ME-130 |
Engineering Standard for LPG Pressure Storage Spheres |
| IPS-G-ME-100 |
General Standard for Atmospheric Above Ground Welded Steel Tanks for Oil Storage |
| IPS-G-ME-110 |
General Standard for Large Welded Low Pressure Storage Tanks |
| IPS-G-ME-120 |
General Standard for Aviation Turbine Fuel Storage Tanks |
| IPS-G-ME-150 |
General Standard for Towers, Reactors, Pressure Vessels and Internals |
| IPS-G-ME-160 |
General Standard for Water Cooling Towers |
| IPS-G-ME-170 |
General Standard for Firetube Package Boilers |
| IPS-G-ME-180 |
General Standard for Water Tube Boilers |
| IPS-G-ME-200 |
Engineering and Material Standard for Fired Heaters |
| IPS-G-ME-210 |
General Standard for Flare Details for General Refinery and Petrochemical Service |
| IPS-G-ME-220 |
General Standard for Shell & Tube Heat Exchangers |
| IPS-G-ME-230 |
General standard for Hairpin-Type heat exchangers |
| IPS-G-ME-245 |
Engineering and Material Standard for Air Cooled Heat Exchanger |
| IPS-G-ME-250 |
General Standard for Pressure and Vacuum Relief Devices |
| IPS-G-ME-253 |
General Requirements for Industrial Incinerators |
| IPS-M-ME-130 |
Material and Equipment Standard for LPG Pressure Storage Vessels and Spheres |
| IPS-M-ME-206 |
Material and Equipment Standard for Reformer Furnaces Including Tube and Outlet Manifolds |
| IPS-M-ME-256 |
Material and Equipment Standard for Steam Jet Ejectors |
| IPS-C-PI-140 |
Construction Standard for Transportation Pipelines (Onshore) |
| IPS-C-PI-240 |
Construction Standard for Plant Piping Systems |
| IPS-C-PI-270 |
Construction Standard for Welding of Transportation Pipeline |
| IPS-C-PI-290 |
Construction Standard for Welding of Plant Piping Systems |
| IPS-C-PI-350 |
Construction Standard for Plant Piping Systems Pressure Testing |
| IPS-C-PI-370 |
Construction Standard for Transportation Pipelines (Onshore) Pressure Testing |
| IPS-C-PI-410 |
Construction Standard for Inside Pipe Chemical Cleaning |
| IPS-E-PI-140 |
Engineering Standard for Onshore Transportation Pipelines |
| IPS-E-PI-200 |
Engineering Standard for Piping Flexibility Analysis |
| IPS-E-PI-221 |
Engineering Standard for Piping Material Selection (on Plot Piping) |
| IPS-E-PI-240 |
Engineering Standard for Plant Piping Systems |
| IPS-G-PI-230 |
General Standard for Strainers & Filters |
| IPS-G-PI-280 |
General Standard for Pipe Supports |
| IPS-G-PI-400 |
Petroleum industry-Metallic Pipes for Industrial piping |
| IPS-G-PI-500 |
Petroleum industry-Metallic Pipes for Linepipes |
| IPS-G-PI-600 |
Flexible Non-Metallic line pipe - pipes (RTP/TCP) -Code of practice |
| IPS-M-PI-110 |
Material and Equipment Standard for Valves |
| IPS-M-PI-130 |
Material and Equipment Standard for Pig Launching and Receiving Traps |
| IPS-M-PI-150 |
Material Standard for Flanges & Fittings |
| IPS-M-PI-170 |
Material and Equipment Standard for Pigs |
| IPS-M-PI-190 |
Material and Equipment Standard for Line Pipe |
| IPS-C-PM-216 |
Construction Standard for Process Machinery Installation and Installation Design |
| IPS-E-PM-100 |
Engineering standard for general design requirements of process machineries |
| IPS-E-PM-110 |
Engineering Standard for Technical Evaluation of Machineries |
| IPS-E-PM-385 |
Engineering Standard for Process Machinery Piping |
| IPS-E-PM-400 |
Engineering Standard for Vendor's Data Requirements |
| IPS-G-PM-100 |
Petroleum industry - Rotary equipment- Pumps - Code of practice |
| IPS-G-PM-105 |
General Standard for Centrifugal Pumps in Petroleum, Petrochemical and Natural Gas Industries |
| IPS-G-PM-120 |
General Standard for Accessibility & Safety of Machineries |
| IPS-G-PM-190 |
Petroleum industry - Rotary equipment- Compressors - Code of practice |
| IPS-G-PM-200 |
General Standard for Reciprocating Compressors for Petroleum, Chemical and Gas Industry Services |
| IPS-G-PM-250 |
General Standard for Petroleum, Petrochemical and Natural Gas Industries-Steam Turbines-Special-Purpose Applications |
| IPS-G-PM-260 |
General Standard for Gas Turbines for Petroleum, Chemical and Gas Industry Services |
| IPS-G-PM-270 |
Petroleum industry - Rotary equipment- Turbines - Code of practice |
| IPS-I-PM-305 |
Standard for Periodical Inspection of Machineries |
| IPS-M-PM-115 |
Material and Equipment Standard for Centrifugal Pumps for General Services |
| IPS-M-PM-125 |
Material and Equipment Standard for Centrifugal Fire Water Pumps |
| IPS-M-PM-130 |
Material and Equipment Standard for Positive Displacement Pumps Reciprocating |
| IPS-M-PM-135 |
Material and Equipment Standard for Light Duty Centrifugal Pumps |
| IPS-M-PM-140 |
Material and Equipment Standard for Positive Displacement Pumps-Rotary |
| IPS-M-PM-150 |
Material and Equipment Standard for Positive Displacement Pumps Controlled Volume |
| IPS-M-PM-160 |
Material and Equipment Standard for Positive Displacement, Oil Sealed-Rotary Vacuum Pumps |
| IPS-M-PM-170 |
Material and Equipment Standard for Axial and Centrifugal Compressors and Expander-Compressors for Petroleum, Chemical and Gas Industry Services |
| IPS-M-PM-180 |
Material and Equipment Standard for Packaged, Integrally Geared Centrifugal Air Compressors for Petroleum, Chemical and Gas Industry Services |
| IPS-M-PM-211 |
Material and Equipment Standard for Reciprocating Compressors for Instrument Air Services |
| IPS-M-PM-220 |
Material and Equipment Standard for Rotary-Type Positive Displacement Compressors for Petroleum, Petrochemical and Natural Gas Industries |
| IPS-M-PM-230 |
Material and Equipment Standard for Special Purpose Centrifugal Fans |
| IPS-M-PM-240 |
Material and Equipment Standard for General Purpose Steam Turbines for Petroleum, Chemical and Gas Industry Services |
| IPS-M-PM-290 |
Material and Equipment Standard for Reciprocating Internal Combustion Engines |
| IPS-M-PM-300 |
Material and Equipment Standard for Special Purpose Gear Units |
| IPS-M-PM-310 |
Material and Equipment Standard for Special Purpose Couplings |
| IPS-M-PM-320 |
Material and Equipment Standard for Lubrication, Shaft Sealing, Oil-Control System and Auxiliaries |
| IPS-M-PM-330 |
Material and Equipment Standard for Mixers |
| IPS-T-PP-100 |
Petroleum products-Measurement of water in crude oil by distillation-Test method |
| IPS-T-PP-105 |
Petroleum products - Mesurement of water and sediment in crude oil by the centrifuge method (laboratory procedure)- Test method |
| IPS-T-PP-110 |
Petroleum products- Determination of density and relative density of crude oils by digital density analyzer-Test method |
| IPS-T-PP-115 |
Petroleum products- Distillation of heavy hydrocarbon mixtures (vacuum potstill method) -Test method |
| IPS-T-PP-120 |
Petroleum products- Determination of nitrogen in liquid hydrocarbons, petroleum and petroleum products by boat-inlet chemiluminescence-Test method |
| IPS-T-PP-125 |
Petroleum products- hydrocarbon types in liquid Petroleum products by fluorescent indicator adsorption- Test method |
| IPS-T-PP-130 |
Petroleum products-Acid number and naphthenic acids by titration |
| IPS-T-PP-135 |
Water in crude oils by coulometric karl fischer titration - Test method |
| IPS-T-PP-140 |
Corrosiveness to copper from petroleum products by copper stip -Test method |
| IPS-T-PP-145 |
Petroleum, petrochemical and natural gas industries-Material selection and corrosion control for oil and gas production systems |
| IPS-E-PR-150 |
Engineering Standard for Recommended Practice for Feasibility study and conceptual design |
| IPS-E-PR-170 |
Engineering Standard for Process Flow Diagram |
| IPS-E-PR-190 |
Engineering Standard for Layout & Spacing |
| IPS-E-PR-200 |
Engineering Standard for Basic Engineering Design Data |
| IPS-E-PR-230 |
Engineering Standard for Piping & Instrumentation Diagrams (P & IDs) |
| IPS-E-PR-250 |
Engineering Standard for Performance Guarantee |
| IPS-E-PR-260 |
Engineering Standard for Detailed Design, Engineering & Procurement |
| IPS-E-PR-280 |
Engineering Standard for Start-Up Sequence & General Commissioning Procedures |
| IPS-E-PR-290 |
Engineering Standard for Plant Operating Manuals |
| IPS-E-PR-300 |
Engineering Standard for Plant Technical & Equipment Manuals (Engineering Dossiers) |
| IPS-E-PR-308 |
Engineering Standard for Numbering System |
| IPS-E-PR-310 |
Engineering Standard for Process Design of Water Systems |
| IPS-E-PR-330 |
Engineering Standard for Process Design of Compressed Air Systems |
| IPS-E-PR-340 |
Engineering Standard for Process Design of Fuel Systems |
| IPS-E-PR-360 |
Engineering Standard for Process Design of Liquid & Gas Transfer & Storage |
| IPS-E-PR-370 |
Engineering Standard for Process Design of Loading & Unloading Facilities for Road Tankers |
| IPS-E-PR-380 |
Engineering Standard for Process Design of Solids Handling Systems |
| IPS-E-PR-400 |
Engineering Standard for Process Design of Cooling Water Circuits |
| IPS-E-PR-410 |
Engineering Standard for Process Design of Hot Oil & Tempered Water Circuits |
| IPS-E-PR-420 |
Engineering Standard for Process Design of Heat Tracing & Winterizing |
| IPS-E-PR-440 |
Engineering Standard for Process Design of Piping Systems (Process Piping & Pipeline Sizing) |
| IPS-E-PR-450 |
Engineering Standard for Process Design of Pressure Relieving Systems Inclusive Safety Relief Valve |
| IPS-E-PR-460 |
Engineering Standard for Process Design of Flare & Blow down Systems |
| IPS-E-PR-470 |
Engineering Standard for Process Design of Emergency Measures |
| IPS-E-PR-491 |
Engineering Standard for Process Requirements of Crude Distillation and Hydrogen Production Units |
| IPS-E-PR-492 |
Engineering Standard for Process Requirements of Caustic and Chemical Systems |
| IPS-E-PR-500 |
Engineering Standard for Process Design of LPG Recovery & Splitter Units |
| IPS-E-PR-551 |
Engineering Standard for Process Design of Gas Treating Units |
| IPS-E-PR-700 |
Engineering Standard for Process Design of Crude Oil Electrostatic Desalters |
| IPS-E-PR-725 |
Engineering Standard for Process Design of Plant Waste Water Sewer Systems |
| IPS-E-PR-730 |
Engineering Standard for Process Design Plant Waste Water Treatment & Recovery Systems |
| IPS-E-PR-735 |
Engineering Standard for Process Design of Plant Solid Waste Treatment & Disposal Systems |
| IPS-E-PR-745 |
Engineering Standard for Process Design of Vacuum Equipment (Vacuum Pumps and Steam Jet - Ejectors) |
| IPS-E-PR-750 |
Engineering Standard for Process Design of Compressors |
| IPS-E-PR-755 |
Engineering Standard for Process Design of Fans and Blowers |
| IPS-E-PR-771 |
Engineering Standard for Process Requirements of Heat Exchanging Equipment |
| IPS-E-PR-775 |
Engineering Standard for Process Design of Double Pipe Heat Exchangers |
| IPS-E-PR-785 |
Engineering Standard for Process Design of Air Cooled Heat Exchangers (Air Coolers) |
| IPS-E-PR-790 |
Engineering Standard for Process Design of Cooling Towers |
| IPS-E-PR-800 |
Engineering Standard for Process Design of Steam Boilers |
| IPS-E-PR-810 |
Engineering Standard for Process Design of Furnaces |
| IPS-E-PR-830 |
Engineering Standard for Process Design of Valves & Control Valves |
| IPS-E-PR-845 |
Engineering Standard for Process Design of Steam Traps |
| IPS-E-PR-850 |
Engineering Standard for Process Requirements of Vessels, Reactors & Separators |
| IPS-E-PR-880 |
Engineering Standard for Process Design of Gas (Vapor) - Liquid Separators |
| IPS-E-PR-895 |
Engineering Standard for Process Design of Solid-Liquid Separators |
| IPS-E-PR-905 |
Engineering Standard for Process Design of Dryers |
| IPS-C-SF-242 |
Construction Standard for Delivery, Testing, Inspection, Quality Control, Commissioning and Maintenance of Fire Fighting Pumps |
| IPS-C-SF-505 |
Standard for Installation, Inspection & Testing of Fire Fighting Fixed Systems |
| IPS-C-SF-507 |
Standard for Training Facilities & Fire Fighters Qualifications |
| IPS-C-SF-550 |
Application Standard for Safety Boundary Limit |
| IPS-E-SF-100 |
Engineering Standard for Classification of Fires and Fire Hazard Properties |
| IPS-E-SF-120 |
Engineering Standard for Offshore Installation Fire Fighting and Fire Protection |
| IPS-E-SF-140 |
Engineering Standard for Foam Generating and Proportioning Systems |
| IPS-E-SF-160 |
Engineering Standard for CO2 Gas Fire Extinguishing Systems |
| IPS-E-SF-180 |
Engineering Standard for Dry Chemical Fire Extinguishing Systems |
| IPS-E-SF-200 |
Engineering Standard for Fire Fighting Sprinkler Systems |
| IPS-E-SF-220 |
Engineering Standard for Fire Water Distribution and Storage Facilities |
| IPS-E-SF-260 |
Engineering Standard for Automatic Detectors and Fire Alarm Systems |
| IPS-E-SF-300 |
Engineering Standard for Application of Breathing Apparatus in Safety and Fire Fighting |
| IPS-E-SF-340 |
Engineering Standard for Fire Fighting Hose Box and Shelter |
| IPS-E-SF-380 |
Engineering Standard for Fire Protection in Buildings |
| IPS-E-SF-400 |
Engineering Standard for Industrial Stairs, Ladders and Platforms |
| IPS-E-SF-410 |
Engineering Standard for Performance Requirements and General Design of Scaffolds |
| IPS-E-SF-504 |
Engineering Standard for Fire Fighting Vessels |
| IPS-E-SF-520 |
Engineering Standard for Fire Stations |
| IPS-E-SF-860 |
Engineering Standard for Air Pollution Control |
| IPS-E-SF-880 |
Engineering Standard for Water Pollution Control |
| IPS-G-SF-100 |
Engineering and Equipment Standard for Fire Fighting Trucks and Pumps |
| IPS-G-SF-110 |
General Standard for Protection Against Radioactive Sealed Sources |
| IPS-G-SF-126 |
General Standard for Hand & Wheel Type Fire Extinguishers |
| IPS-G-SF-130 |
General Standard for Disposal of Solid Waste |
| IPS-G-SF-140 |
General Standard for Masks & Breathing Apparatus |
| IPS-G-SF-202 |
Fix Fire Fighting Systems |
| IPS-G-SF-240 |
General Standard for Fire Fighting Pump Systems & Trailers |
| IPS-G-SF-310 |
General Standard for Gas Detectors |
| IPS-G-SF-340 |
General Standard for Ancillary and Miscellaneous Safety and Fire Equipment |
| IPS-G-SF-345 |
General Standard for Safety Belts |
| IPS-G-SF-355 |
General Standard for Safety Portable Ladders |
| IPS-G-SF-440 |
General Standard for Fire Protection in General & Explosive Stores |
| IPS-G-SF-460 |
General Standard for First Aids & Sanitation |
| IPS-G-SF-503 |
General Standard for Delivery-Commissioning, Preventive Maintenance of Fire Fighting Trucks |
| IPS-G-SF-540 |
General Standard for Safety & Fire Training Centers Fire Station Facilities |
| IPS-G-SF-860 |
General Standard for Air Pollution Control |
| IPS-G-SF-870 |
General Standard for Soil Pollution Control |
| IPS-G-SF-880 |
General Standard for Water Pollution Control |
| IPS-G-SF-900 |
General Standard for Noise Control and Vibration |
| IPS-M-SF-105 |
Material and Equipment Standard for Valves, Reels, Hoses, Nozzles and Monitors for Fire Fighting |
| IPS-M-SF-142 |
Material and Equipment Standard for FLC-Foam Proportioners Generators and Twin Agents |
| IPS-M-SF-325 |
Material and Equipment Standard for Personnel Safety and Fire Fighters Protective Equipment |
| IPS-M-SF-455 |
Material and Equipment Standard for Fire Blanket-Fire Fighters Suits (Fire-Proof Types) Fire-Resisting Curtain & Shields |
| IPS-M-SF-504 |
Material and Equipment Standard for Fire-Fighting Vessels |
| IPS-C-TP-101 |
Construction Standard for Surface Preparation |
| IPS-C-TP-102 |
Construction Standard for Painting |
| IPS-C-TP-352 |
Construction Standard for Lining |
| IPS-C-TP-742 |
Construction Standard for Corrosion Consideration During Fabrication & Installation |
| IPS-E-TP-350 |
Engineering Standard for Linings |
| IPS-E-TP-702 |
Thermal insulation of pipework, ductwork, associated equipment and other industrial installations in the temprature range of -100 °C to +870 |
| IPS-E-TP-740 |
Engineering Standard for Corrosion Consideration in Material Selection |
| IPS-E-TP-760 |
Engineering Standard for Corrosion Consideration in Design |
| IPS-E-TP-780 |
Engineering Standards for Chemical Control of Corrosive Environments |
| IPS-I-TP-802 |
Inspection Standard for Internal Corrosion Survey Methods & Inhibitor Evaluation (for Pipeline & for Plant) |
| IPS-I-TP-820 |
Inspection Standard for Monitoring Cathodic Protection Systems |
| IPS-M-TP-105 |
Material and Equipment Standard for Asphalt Mastic (Cold Applied) |
| IPS-M-TP-110 |
Material and Equipment Standard for Vinyl Paint (Aluminum) as Intermediate and Top Coat (Finish) |
| IPS-M-TP-115 |
Material and Equipment Standard for Zinc Oxide, Iron Oxide, Raw Linseed Oil and Alkyd Primer |
| IPS-M-TP-120 |
Material and Equipment Standard for Zinc Oxide, Iron Oxide and Alkyd Intermediate Paint |
| IPS-M-TP-125 |
Material and Equipment Standard for White Alkyd Paint for Top Coat (Finish) |
| IPS-M-TP-130 |
Material and Equipment Standard for Colored Alkyd Paint for Top Coat (Finish) Except White |
| IPS-M-TP-135 |
Material and Equipment Standard for Chlorinated Rubber Paint for Top Coat (Finish) |
| IPS-M-TP-140 |
Material and Equipment Standard for Chlorinated Rubber Paint for Intermediate Coat |
| IPS-M-TP-145 |
Material and Equipment Standard for Chlorinated Rubber Inhibitive Primer |
| IPS-M-TP-150 |
Material and Equipment Standard for Alkyd Paint (Aluminum) Leafing as Top Coat (Finish) |
| IPS-M-TP-155 |
Material and Equipment Standard for Alkyd Paint (Aluminum) Non - Leafing as Intermediate |
| IPS-M-TP-160 |
Material and Equipment Standard for Alkyd Paint (High Build Thixotropic Leafing Aluminum) as Top Coat (Finish) |
| IPS-M-TP-168 |
Material Standard for Acrylic Silicone Finish Paint for Temperature Applications Up to 230°C |
| IPS-M-TP-175 |
Material and Equipment Standard for Silicone Alkyd Paint (White or Colored) as Top Coat (Finish) |
| IPS-M-TP-180 |
Material and Equipment Standard for Wash Primer (Basic Zinc Chromate-Vinyl Butyral) |
| IPS-M-TP-190 |
Material and Equipment Standard for Coal Tar Epoxy Polyamide Paint as Primer, Intermediate and Top Coat (Finish) |
| IPS-M-TP-200 |
Material and Equipment Standard for Vinyl Paint, (White or Colored) as Primer, Intermediate and Top Coat (Finish) |
| IPS-M-TP-202 |
Material and Equipment Standard for Tow Pack Amine-Adduct Cured Epoxy Paint as Primer, Intermediate and Top Coat |
| IPS-M-TP-205 |
Material and Equipment Standard for Zinc Rich Epoxy Paint (Organic Zinc-Rich) as Primer, Intermediate and Top Coat (Finish) |
| IPS-M-TP-210 |
Material and Equipment Standard for (Zinc Silicate) Inorganic Zinc-Rich Paint as Primer |
| IPS-M-TP-215 |
Material and Equipment Standard for Epoxy Polyamide Primer |
| IPS-M-TP-220 |
Material and Equipment Standard for Epoxy Polyamide Paint as Intermediate Paint |
| IPS-M-TP-225 |
Material and Equipment Standard for Epoxy Polyamide Paint as Top Coat (Finish) |
| IPS-M-TP-230 |
Material and Equipment Standard for Coal Tar Mastic (Cold Applied) |
| IPS-M-TP-235 |
Material and Equipment Standard for Two Pack Aliphatic Polyurethane Paint as Top Coat (Finish) |
| IPS-M-TP-240 |
Material and Equipment Standard for Two Pack Aliphatic Polyurethane Paint as Top Coat (Camouflage Colors) |
| IPS-M-TP-250 |
Material and Equipment Standard for Amine-Cured Epoxy Resin as Primer, Intermediate, and Top Coat for Atmospheric Environment |
| IPS-M-TP-306 |
Material and Equipment Standard for Bitumen Impregnate Glass Fiber Mat for Outer wrap |
| IPS-M-TP-314 |
Material Standard for Hand Applied Laminated Tape (Suitable for Hot Applied Coating Systems) |
| IPS-M-TP-315 |
Material Standard for Perforated Plastic Tape (as Rockshield) for Pipe Coating |
| IPS-M-TP-316 |
Material Standard for Plastic Grid (as Rockshield) for Pipe Coating |
| IPS-M-TP-323 |
Material Standard for Primer to be Used with Hand-Applied Laminated Tape Suitable for Hot-Applied Tape Coating Systems |
| IPS-M-TP-672 |
Material and Equipment Standard for Inhibitor, Anti-Icing for Use in Jet Turbine Fuels |
| IPS-M-TP-675 |
Material and Equipment Standard for Inhibiting Package for Cooling Water Systems |
| IPS-M-TP-710 |
Material and Equipment Standard for Thermal Insulation |
| IPS-M-TP-750 |
Material and Equipment Standard for Cathodic Protection |
| IPS-M-TP-770 |
Plant -Applied external fusion bond epoxy Pipe coating for steel |
| IPS-M-TP-780 |
Steel tubes and fittings for onshore and offshore pipelines external liquid applied epoxy and epoxy |
| IPS-M-TP-790 |
Petroleum, petrochemical and natural gas industries -Internal coating and lining of steel storage tanks |
| IPS-M-TP-800 |
Petroleum, petrochemical and natural gas industries production systems |
| َAccepted Standards |
| ISIRI - 369 |
Petroleum products- Leaded aviation gasoline – Specifications and test methods |
| ISIRI - 6531 |
Cumene (Isopropylbenzene) manufactured via a zeolite process – Specifications |
| ISIRI - 17409 |
para-Dichlorobenzene Technical - Specifications and test methods |
| ISIRI - 1205 |
Linear alkyl benzene - Specifications |
| ISIRI - 17960 |
Ethylbenzene – Specifications |
| ISIRI - 12234 |
Heavy alkyl benzene - Specifications |
| ISIRI - 1552 |
Specifications for industrial grade benzene |
| ISIRI - 1549 |
Refined benzene 535-specification |
| ISIRI - 1551 |
Toluene for industrial use - Specifications |
| ISIRI - 17365 |
Toluene-chemical analysis by gas chromatography |
| ISIRI - 11382 |
Xylenes for p-Xylene feedstock- Specifications |
| ISIRI - 16871 |
High purity p-Xylene- Specification |
| ISIRI - 11383 |
o-xylene980- specifitions |
| ISIRI - 16782 |
High-flash aromatic naphthas- specification |
| ISIRI - 18223 |
VM& p naphthas- methods specification and test methods |
| ISIRI -17142 |
Fuel oils-specifications and test methods |
| ISIRI - 5612 |
Fuel-kerosine-specification |
| ISIRI - 257 |
Petroleum products- Fuels liquefied - petroleum gases- Specifications |
| ISIRI - 4904 |
Petroleum products - Fuel - Gasoline for internal combustion - Specifications |
| ISIRI - 4903 |
Petroleum industry- Oil products - Gas oil - Specifications and test methods |